Mining Machine Spare Parts Cone Crusher Accessories HP5 Air Cooler
It is possible to install the HP400 air cooling on the HP300 to achieve better heat dissipation by increasing the fan power?
The principle of cooling by the cooling fan is to achieve the cooling effect by returning oil from the cooling equipment. If you want to increase the cooling fan power to achieve the cooling effect,
1. A corresponding bracket needs to be made to carry the HP400 cooler;
2. It is necessary to increase the power of the oil pump to achieve a greater throughput of lubricating oil;
3. The fuel tank needs to be enlarged to ensure that there is enough lubricating oil in the tank;
The amount of work is relatively large and cumbersome, so we do not recommend changing it like this.
If you want to achieve better cooling effect, here are some suggestions:
1. Replace the HP300 with a new cooler (as the equipment is used longer and longer, the effect of the old cooler will become worse and worse).
2. Place the gas station in a place with good ventilation. If conditions permit, you can add an electric fan to cool it down.
3. If the oil station is in a confined space and it is inconvenient to move, it is recommended to install an air conditioner to achieve a very good cooling effect.
Which Main Parts We Have?
|
|
-
Eccentric Wearing Plate
-
Bottom Shell Bushing
-
Bottom Shell Liner
-
Burning Ring
-
Gear
-
Pinion
-
Pinionshaft
-
Pinionshaft Housing
-
Spider Cap
-
Spider Bushing
-
Step Washer
|
|
Quality Control:
Gantry Machining Center MAZAK FJV-6080
Main motor energy rate: 37KW
Travel: 2000mm * 1400mm * 660mm
Workbench: 2000mm * 1400mm
Spindle speed: 20-10000min-1
Positioning accuracy: ± 0.001mm
Knife magazine: 30 pieces
Knife handle: HSKA100
Boring and Milling Machining Center TOSHIBA BTD-110H.R16
Travel: 2000mm * 1500mm * 1150mm
Workbench: 2200mm * 2000mm
Knife handle: BT50
Revolution: 3000 (r/min)
Positioning accuracy: 0.01
Knife magazine: 60 pieces
Load capacity: ≤ 6.3T
Company Introduction:
Our Machines:
Q&A
1. Q: What kinds of products do you offer?
A: We provided parts are mainly related to your plant machine. It ranges from the drill rod, excavator buckets and wheel loaders, crusher spare parts, construction machinery parts, brass bush, conveyor and screen spare parts, beneficial equipment spare parts, grinding mill spare parts, machining spare parts and other customized spare parts.
2. Q: What kind of materials are you familiar with?
A: We are familiar with carbon steel, alloy steel, standard wearing plate, high manganese steel, high chrome steel, martensitic steel, casting iron, bronze and ceramic insert material.
3. Q: What's the maximum single weight that can be casted? What is your processing capacity per day?
A: The single weight that can be casted at one time is 13 metric tons. The capacity is 80 tons per working day.
4. Q: Can you use foundry machining castings?
A: Yes, the CNC machine can machine material hardness from HB200 to HRC62.The maximum machining length is 8m and maximum width is
4m.
5. Q: What information do we need to provide to you in order to confirm our parts order?
A: We work with technical drawings for any non-standard products. If the order is for standard parts, you only have to provide us with the part number so we may define the parts of the order.
6. Q: May we visit the factory?
A: Yes, you can visit the factory during working days and our sales team would he happy to assist you.
It is possible, to take the high speed train from Shanghai station to the factory and we can pick up you at the airport or train station.
What Else You May Need?
Audited Supplier 
){kind=link}