Large Capacity Long Service Life Jaw Crusher Replacement Parts C140 C145 Bearing Housing
The frame bearing housing of the broken jaw or the temperature in the movable jaw is too high?
Cause of issue: 1. The bearing is short of oil, oil is cut off or too much oil is filled. 2. The oil hole is clogged, making it impossible to fill with oil. 3. The position of the counterweight of the flywheel is offset, making it difficult to stabilize the frame. 4. Axial movement of the fixed bushing 5. The bearings are worn and the cage is damaged. 6. The friction between the movable jaw seal sleeve and the top cover causes the temperature to rise, or the frame bearing cover and the main shaft move synchronously and the friction heats up.
Solution: 1. Read the instructions and fill in oil according to the instructions. 2. Clean the blockage in the oil hole and oil tank promptly 3. Adjust the attitude and position of the counterweight in the flywheel groove 4. Tighten the tightening bushing firmly 5. Replace with new bearings promptly 6. Replace the top cover and sealing sleeve, loosen the bearing top cover of the frame bearing housing, and use a fuse as a gasket and insert cover to press into the bearing seat to eliminate rotation.
Which Main Parts We Have?
Jaw Plate
Cheek Plate
Protection Plate
Side Plate
Toggle Plate
Toggle Seat
Bearing Housing
Tightening Wedge
Mounting Wedge
Fill Wedge
Wedge
Roller Bearing
Tightening Bushing
Front End
Rear Edge
Pulley
Flywheel
Pitman
Spring
Guide Ring
Return Rod
Support Bar
Hydraulic Cyliner
Spacer
Lubrication Unit
Deflector Plate
Damper
Progressive Feeder
Frame Assy
Supports Installation
Taper Bushing
Bracket
Shaft
Quality Control:
Gantry Machining Center MAZAK FJV-6080
Main motor energy rate:37KW Travel:2000mm * 1400mm * 660mm Workbench:2000mm * 1400mm Spindle speed:20-10000min-1 Positioning accuracy:± 0.001mm Knife magazine:30 pieces Knife handle:HSKA100
Boring and Milling Machining Center TOSHIBA BTD-110H.R16
A: We provided parts are mainly related to your plant machine. It ranges from the drill rod, excavator buckets and wheel loaders, crusher spare parts, construction machinery parts, brass bush, conveyor and screen spare parts, beneficial equipment spare parts, grinding mill spare parts, machining spare parts and other customized spare parts.
2. Q: What kind of materials are you familiar with?
A: We are familiar with carbon steel, alloy steel, standard wearing plate, high manganese steel, high chrome steel, martensitic steel, casting iron, bronze and ceramic insert material.
3. Q: What's the maximum single weight that can be casted? What is your processing capacity per day?
A: The single weight that can be casted at one time is 13 metric tons. The capacity is 80 tons per working day.
4. Q: Can you use foundry machining castings?
A: Yes, the CNC machine can machine material hardness from HB200 to HRC62.The maximum machining length is 8m and maximum width is 4m.
5. Q: What information do we need to provide to you in order to confirm our parts order?
A: We work with technical drawings for any non-standard products. If the order is for standard parts, you only have to provide us with the part number so we may define the parts of the order.
6. Q: May we visit the factory?
A: Yes, you can visit the factory during working days and our sales team would he happy to assist you. It is possible, to take the high speed train from Shanghai station to the factory and we can pick up you at the airport or train station.
Audited Supplier 
){kind=link}